ianolz.blogg.se

Legacy installations of ShowRunnerCLC™ do not have the new ShowRunnerCLC™ landing page, and thus the XPanel installer will need to be downloaded and installed separately. ShowRunnerCLC™ Installations v2.200 and Older

After the XPanel software is installed, the XPanel can be accessed by clicking the "Launch - User Interface" button.

air file to install the Crestron XPanel application (the filetype downloaded depends on whether your machine is a Windows or Mac)

Once the download is finished, run the downloaded.

Click the "Install" button to download the CrestronXPanelSetup installed.

Click on the ShowRunnerCLC™ icon in the upper right corner.

Navigate to a Web browser (Chrome or Firefox recommended).

Accessing the XPanel ShowRunnerCLC™ Installations v3.00 and Newer The method used and required IP settings for the computer will vary by location, however if it was possible to access the XPanel through a Web browser before, then it will be possible to access the XPanel using one of the methods described below. Connect to the Lighting NetworkĪs with accessing the XPanel through a Web browser, it is necessary to be connected to the lighting network. See the Chief Integrations ShowRunnerCLC™ UI Guide for more information on how to use this interface. The UI for this XPanel is the same as the old web XPanel UI and the UI on any TSW touch panels. (Note, ShowRunnerCLC™ Reports and Management will still be available.) Instead, the XPanel must be accessed using an alternate method depending on which version of ShowRunner is currently running on the processor.

Prior to 2021, it has been possible to access the ShowRunnerCLC™ XPanel (a virtual touch panel interface) by connecting a laptop or computer to the lighting network and navigating to from a Flash-enabled Web browser (where "(ProcessorIpAddress)" is replaced with the processor's IP Address).Īfter December 2020, Flash will no longer function, meaning that it will no longer be possible to access the XPanel in this way.